Puppis 90

The largest Puppis, for atriums, auditoria and other tall spaces: up to 7,752 lumens at 4000K, or 8,434 lumens from the 100 W Fade to Warm version. 15°, 24°, 40° or 60° optics, in recessed or yoke versions, fitting the same 210 mm cut-out as the Puppis 55.

Request a quoteAsk a technical question

Downloads

Puppis 90 recessed downlight with machined aluminium heatsink
Output (up to)
7,752lm
Power
90W
Efficacy (up to)
86lm/W
CRI
90 / 97
Beam options
15–60°

Machined Aluminium Heatsink

Every Puppis body is machined from solid aluminium, so heat spreads evenly away from the LEDs.

Cooler emitters keep their output and colour for longer: 50,000 hours to L80 B20.

High Colour Rendering

Choose 90 or 97 CRI (Ra) emitters, binned to a 3-step MacAdam ellipse so every fitting in a room matches.

Precision optics give a clean, uniform beam with UGR below 19.

Fade to Warm

Fade to Warm versions start at 3000K and grow warmer as they dim, down to 1800K, just like a halogen lamp.

Ideal for venues moving to LED who want to keep the classic warmth of incandescent dimming.

Norman stone chapel with round columns and arches, softly lit in warm white above rows of wooden chairs
In the spaceWarm, sympathetic light for historic interiors

2 ways to mount it

The same light engine and optics in every version, so one fitting can follow the architecture from room to room.

  • Puppis 90, recessedRecessed

    Sits flush in the ceiling, so only the trim and the light are seen.

    Ø250 mm trim, 210 mm cut-out

  • Puppis 90, yoke mountYoke Mount

    Fixed to the structure above and aimed after installation, for open or high ceilings.

    216 mm across the pivots, 205 mm high

Stadthalle Chemnitz concert hall, its tiered ceiling filled with hundreds of warm white Puppis downlights above rows of blue seats
In the spaceDiscreet downlights for the grandest auditoriums

Specifications

Light Output

Output
Up to 7,752 lm (4000K, 40°, 90 CRI); 8,434 lm Fade to Warm
CCT
2700K, 3000K, 4000K or 3000K Fade to Warm
Beam angle
15°, 24°, 40°, 60°
CRI (Ra)
90 or 97
Colour consistency
3-step MacAdam ellipse
Glare
UGR < 19
Efficacy
Up to 86 lm/W

Electrical

Input power
90 W (100 W Fade to Warm)
LED drive
34–36 V DC, 2,200–2,300 mA
Driver
External constant current (GDS driver)
Control
Non-dim, mains dim, DALI or DMX
Emergency
Emergency-capable versions available

Physical

Mounting
Recessed or yoke
Housing
Machined aluminium
Trim diameter
250 mm
Cut-out
210 mm (205–240 mm)
Weight
1.7 kg recessed, 1.9 kg yoke
Finish
Black, white or custom RAL

Protection & Lifetime

IP rating
IP20
LED lifetime
50,000 hours (L80 B20)
Max. ambient
45 °C
Installation
Non-IC rated: keep a 76 mm air gap
Warranty
5 years

Accessories

  • GDS LED driver: non-dim, mains dim, DALI or DMX
  • Drive Hub, for centralised power and control

Product codes

Loading catalogue

Choose the options you need to find the Puppis 90 product code for your schedule. Options that don't combine with your other choices are greyed out.

Loading Puppis 90 product codes…

Comparing fittings? Search every luminaire in the Luminaire Finder

Dimensions

Puppis 90 dimension drawings. Recessed: body 205 mm wide, 165 mm high, trim Ø250 mm. Yoke: U-bracket 175 mm wide, 205 mm high overall, 216 mm across the pivot knobs, with a Ø11 mm fixing hole and slots 40 mm either side of the centre.

All dimensions in millimetres.

Also available

Specifying Puppis 90 for a project?

Our team can advise on mounting, beam angles, finishes and control, and prepare a quote for your scheme.

Request a quoteAsk a technical question
Puppis 90Enquire